A Maintenance Schedule Built for Ozarks Humidity

Most emergency calls are preventable, and in this climate the schedule looks different from what you would follow in a dry or coastal state.

March, before storm season

Photograph the door straight on while it is undamaged so you have a documented before. Check the seal still compresses and springs back after the winter. Look at both cables at the bottom fitting for the rust that built up over the wet months.

July, mid-humidity

The important one here, and the one most owners skip. Re-lubricate hinges, roller stems and springs, because summer moisture drives lubricant off steel faster than heat alone does. If you hear a dry grind rather than a squeal, a bearing has already gone.

September, before the cold

Balance test and spring inspection. This is the month to find a tired spring, while it is still a scheduled visit rather than a January morning with your car shut in.

November, ice preparation

Replace the bottom seal if it does not spring back, clear the track, confirm the photo-eyes are aligned and clean, and check that the safety reversal works with a solid object under the door.

Lubrication, done properly

A garage door lubricant, silicone or lithium based. Not WD-40, which is a solvent and strips out what you want to keep. Hinges, roller stems, springs and the opener rail - not the track, which should be clean and dry.

Free estimate — no charge for the visit

Tell us what the door is doing and we will tell you what it normally means in Springfield. Every job is quoted in person and in writing before any work starts.

Call (417) 216-7189 Request a callback